Course Description

Begin with kinematics in robotics, after which the DH (Denavit Hartenberg) algorithm is addressed. A main thrust of the course is the degrees of freedom given to robots. In general, degrees of freedom (DOF) is the set of independent displacements that specify completely the displaced or deformed position of the body or system. You will learn that in robotics, DOF is a phrase that is often used to describe the number of directions that a robot can move a joint. You will also grapple with what ‘holonomic’ and ‘non-holonomic’ mean. Learn how links are rigid sections between joints and the specific type of motion joints can provide.

Next, move onto robot manipulators and their specific sections. Study how the robot’s body and arms position objects in its work volume and what the wrist assembly is used for. Robotics architecture is the combination and disposition of the different kinds of joints that configure the robot kinematical chain, and you will analyze the five common body-and-arm configurations for industrial robots, the last of which is the selective compliance assembly robot arm (or SCARA). SCARA robots are similar to jointed-arm robots except that the vertical axes are used for shoulder and elbow joints to be compliant in the horizontal direction for vertical insertion tasks.

Finally, you will be taught that the relative position and orientation of the axes of two successive joints can be specified by two link parameters, link length and link twist angle.

What you'll learn in this course?

• Kinematics

• Engineering

• Mechanical Engineering

• Robotics